CPAP Pressure Adjustment
Phillips Respironics REMstar Auto A-flex System One CPAP
WARNING: Only change these settings if a medical professional/your doctor instructs you to do so. Use this a a guide to complete doctor's orders only. This guide is only for use on your Phillips Respironics REMstar Auto A-flex System One CPAP medical device (with or without the humidifier). Be careful to not accidentally adjust a setting that you are not intending to adjust.
Following a few simple steps, you will be able to adjust the air pressure on your CPAP device. This is a simple process that anyone should be able to follow. This tutorial will be kept short and to the point.
Step 1:
- Rotate the control dial until "Setup" is highlighted on the screen.
Step 2:
- To access the advanced setup settings, press down and hold the control dial and the ramp button at the same time until you hear a "beep".
Step 3:
- Scroll down until you see "CPAP pres" and press the control dial. This will select the pressure setting.
Step 4:
- Rotate the control dial until you select your correct prescription or adjustment that has been approved by a medical provider and press down the control dial to select the new pressure setting.
Step 5:
- Exit out of the advanced settings menu to apply your changes.